Finishing the Brush Gaurd

Finishing the Brush Guard

a nice break from the monotony of renovations...

It's been a day of measuring, cutting, shaping, welding, drilling, tapping and test fitting...

The winch base-plate is securely welded into place, as is the "A" frame support for the lights and winch line...

Again 3 coats of the El' Cheep-o High Gloss Black Rust Paint, sprayed on...

The rust paint is so thick it has to be cut almost 50/50 with thinner to flow through the paint gun.

The Drive-Shed is already realizing it's potential...

And here it is assembled for the last & final time...

The lights are wired directly to the "High-Beams" of the factory lighting.

As this is strictly a farm truck (off-road) I don't give 2 (two) fucks for legal or DOT regulations...